VEVOR 120-Volt 800-Amp Mig Flux-cored Wire Feed Welder

Description

VEVOR 800W Stud Spot Welder: Perfect Welds in Every Spot: Elevate your automotive dent repair with the VEVOR 800W stud spot welder; Its precision welding prowess, user-friendly operation, versatile applications, enhanced safety features, and all-inclusive professional package make it the ultimate solution for seamless and efficient dent repair;;[Package Content] 1 x Plastic Blow-molded Box; 1 x Set of Slide Hammer with Welding Tip; 1 x Draw Hook; 1 x Six-Claw Draw Hook; 1 x Pack of 2.0mm Welding Studs (500 pcs); 1 x Pack of 2.5mm Welding Studs (500 pcs); 1 x Pack of Round Gaskets (50 pcs); 1 x Pack of Long Gaskets (50 pcs); 1 x Pack of Wave Lines (20 pcs); 1 x Gasket Welding Electrode; 1 x Long Gasket Welding Electrode; 1 x Stud Welding Electrode; 1 x Wave Line Welding Electrode; 1 x Hot Press Flattening Electrode; 1 x Set of Shoulder Straps; 1 x Instruction Manual

• Prior to welding, please thoroughly clean the sheet metal surface for enhanced welding strength
• The thickness of single-sided welding can reach 1.2 mm without damaging the car body
• Available in 5 modes Stud Welding, Round Spacer, Long Spacer, Wavy Line, Thermal Annealing
• Reliable Precision Welding: Engineered for professional automotive repair welding, VEVOR 800W powerful stud spot welder handles up to 1.2mm single-side welding thickness, without damaging vehicle’s body; Prior to welding, please thoroughly clean the sheet metal surface for enhanced welding strength;
• User-Friendly Operation: Choose from 5 modes – Stud Welding, Round Gasket, Long Gasket, Wave Line, Thermal Annealing; You can swiftly switch between various welding modes for accurate welding, and cooperate with the slide hammer for quick dents repair; Enjoy easy and straightforward operation;
• Broad Applications: With 5 types of metal studs to choose from – 2.0mm and 2.5mm studs, round and long gaskets, and wave lines – this stud welder dent repair kit caters to various needs; It effectively repairs pointed shapes, deep dents, flat areas, long straight lines, and curves, applicable for carbon steel, stainless steel, iron, and galvanized sheet metal;
• Enhanced Overheat Protection: Our auto body spot welding machine features a smart overheat protection system that kicks in at 203 degrees Fahrenheit/95 degrees Celsius, preventing short circuits and machine burning;
• All-in-one Professional Kit: The VEVOR stud dent repair kit includes a complete set of accessories neatly stored within a toolbox; Its compact and lightweight design, along with a portable handle, ensure easy usage wherever it’s needed;
• Specification: Item Model Number: H-007; Input Voltage: AC120V 60HZ; Rated Power: 800W; Net Weight: 20.3 lbs / 9.2 kg; Product Dimensions: 11.4 x 8.7 x 3.9 in / 290 x 220 x 100 mm; Slide Hammer Size: 16.7 in / 425 mm; Applicable Welding Base Materials: Carbon Steel, Stainless Steel, Iron, Galvanized Sheet

Dimensions

• Depth (Inches): 11.4
• Ground Cable Length: 6 feet
• Height (Inches): 3.9
• Maximum Weldable Thickness (Mild Steel): 12 gauge
• Maximum Wire Thickness: 0.045mm
• Minimum Weldable Thickness (Mild Steel): 1/2-in
• Minimum Wire Thickness: 0.030mm
• Weight (lbs.): 20.3
• Welding Gun Cable Assembly Length: 15 feet
• Width (Inches): 8.7

Features

• Amperage: 800
• Contact Tips Included: No
• Drive Motor Overload: Yes
• Duty Cycle (Percentage): 30
• Hand Shield Included: No
• Helmet Included: No
• Input AC Voltage: 120
• Instructional Media Included: Yes
• Maximum Wire Feed (Inches per minute): 15
• Minimum Wire Feed (Inches per minute): 13
• Primary Circuit Breaker: No
• Process: MIG flux-cored
• Sample Flux Wire Included: No
• Sample MIG Wire Included: No
• Thermal Overload Protection: Yes
• Uses Argon Gas: No
• Uses Argon/Carbon Dioxide Mixed Gas: No
• Work Clamp Included: Yes

Certifications

• CA Residents: Prop 65 Warning(s): No
• Safety Listing: Not safety listed

Miscellaneous

• UNSPSC: 23271400

Additional information