VEVOR 230-Volt 250-Amp Mig Flux-cored Wire Feed Welder

$181.37

254 in stock

SKU: 5015059723 Category:
 

Description

50AMP Air Plasma Cutter: VEVOR’s plasma cutter non-touch pilot delivers strong cutting performance in a compact body; The pilot arc is especially useful for continuous cutting on rough surfaces or dirty metals; An optimized IGBT transistor provides high-power output for thick metal cutting and steady output for thin metal cutting; our power plasma cutter helps you during DIY projects, cutting your time in half so you can get the job done!;[Package Content] 1 x Non-Touch Plasma Cutter; 1 x 16.4FT/5 m AG-60 Cutting Torch; 1 x 6.56FT/2 m Ground Clamp; 1 x Relief Valve + 2 Connectors; 1 x 9.84FT/3 m Air Pipe; 4 x Hose Clamps; 1 x Teflon Tape; 2 x Cable Racks

  • Guided arc technology allows you to cut without touching the metal tip
  • IGBT inverter will greatly improve the performance of plasma cutting machines
  • Use harmless compressed air to cut aluminum, stainless steel, mild steel, copper and other metals
  • Non-Touch Pilot Arc: Pilot arc technology allows you to cut without touching the tip of the metal; This plasma cutter pilot arc delivers a consistent and precise current to the cutting surface with better cutting quality and longer consumable life; Ideal Clean Cut: 1/2″(12 mm); Maximum Severance Cut: 5/8″(16 mm);
  • All Safety No Heat: The unique air channel design increases the heat dissipation of the power device; The IGBT inverter will greatly improve the performance of the plasma cutting machine; The outstanding 30%@104 ??F, 50A; 60%@104 ??F, 33A; 100%@104 ??F, 25A duty cycle can also ensure long-time cutting;
  • 50AMP Premium Cutter: Use non-hazardous compressed air to cut aluminum, stainless steel, mild steel, copper, and other metals; Suitable for a wide range of applications, including sheet metal fabrication, light industrial, automotive repair, plumbing work, and other maintenance services; You’ll be prepared to take on any challenge!
  • Sharper than Sharp: The gastight air filter regulator allows you to quickly connect to your air compressor; It can lower or maintain air pressure to reach effective cutting; And you can cut through rough, painted, and rusty surfaces while producing minimal slag without any air leakage;
  • More than You Expected: The extra long 16.4′ plasma torch and 6.56′ ground clamp with cable offers maximum convenience by extending your working area; Quit wasting time searching for an extension cord and adapter; The kit also includes an air regulator, air hose, 4 hose clamps, 2 cable racks, and some consumables;
  • Specification: Model: VV-PC-CUT50P; Arc Striking: HF Pilot Arc; Input Voltage: AC110/220V??10%; Output Current: 110V: 20-40A; 220V: 20-50A; Ideal Clean Cut: 1/2″/12 mm; Maximum Severance Cut: 5/8″/16 mm; Cutting Material: Aluminum, Stainless Steel, Mild Steel, Copper; Power Factor: 0.8; Efficiency: 0.86; Insulation Grade: F; Open Circuit Losses: 220V 14W; 110V 56W; Operating Air Pressure: Less than 0.5MPa; Access Air Pressure: Less than 0.8Mpa; Enclosure Protection Level: IP21S; Item Weight: 23lb/10.4 kg; Item Size: 14.2″ x 5.9″ x 11.8″/36 x 15 x 30 cm

Dimensions

  • Depth (Inches): 17.3
  • Ground Cable Length: 6 feet
  • Height (Inches): 11.8
  • Maximum Weldable Thickness (Mild Steel): 1/2-in
  • Maximum Wire Thickness: 0.045mm
  • Minimum Weldable Thickness (Mild Steel): 1/4-in
  • Minimum Wire Thickness: 0.030mm
  • Weight (lbs.): 17.35
  • Welding Gun Cable Assembly Length: 15 feet
  • Width (Inches): 7.3

Features

  • Amperage: 250
  • Contact Tips Included: No
  • Drive Motor Overload: Yes
  • Duty Cycle (Percentage): 30
  • Hand Shield Included: No
  • Helmet Included: No
  • Input AC Voltage: 230
  • Instructional Media Included: Yes
  • Maximum Wire Feed (Inches per minute): 15
  • Minimum Wire Feed (Inches per minute): 13
  • Primary Circuit Breaker: No
  • Process: MIG flux-cored
  • Sample Flux Wire Included: No
  • Sample MIG Wire Included: No
  • Thermal Overload Protection: Yes
  • Uses Argon Gas: No
  • Uses Argon/Carbon Dioxide Mixed Gas: No
  • Work Clamp Included: Yes

Certifications

  • CA Residents: Prop 65 Warning(s): No
  • Safety Listing: Not safety listed

Miscellaneous

  • UNSPSC: 23271400

Additional information

Weight 18.35 lbs
Dimensions 17.3 × 7.3 × 11.8 in
Package Weight

18.35 lbs

Package Dimensions

18.3 × 8.3 × 12.8 in

Brand

VEVOR

Model

DLZ50A110220VO4ZEV5

UPC

840281543854

Product Width

7.3 in

Reviews

There are no reviews yet.

Be the first to review “VEVOR 230-Volt 250-Amp Mig Flux-cored Wire Feed Welder”

Your email address will not be published. Required fields are marked *